The holes for various screws aren't all great, either. Disappointing. I'm inclined to send them back.
Wednesday 16 March 2016
This time, the bad print isn't mine
I got new printed parts for the extruder from electronic-things.de, though I am not exactly impressed with the print quality. The hole for the hotend and for the hobbed bolt are both rather stringy and will need some bits removed to work, let alone work in the long run:
Subscribe to:
Post Comments (Atom)
-
I've had the worst time with my PETG filament, test prints literally exploding during the print and finished prints being very brittle. ...
-
With my new pretty hobbed bolt mounted, I attempted a little extrusion. Unfortunately, all that happened was that the gear end started unscr...
-
After last weekend's fiasco, I've decided to take my extruder apart, at least enough to see if there are any obvious signs of block...
I'm not familiar with your exact model but those problems look tolerable, as long as the e3d fits snugly once you add the retaining screw.
ReplyDelete